New from Kleinn Air Horns is our forward-thinking, forward-installation, expandable Ford Onboard Air System for 2009-2014 Ford F-150 and F-150 Raptor. It is intended for all F-150 models except EcoBoost™. The system features a 100% duty cycle air compressor and 3-gallon, multi-port air tank. The system is expandable with an option for a second air compressor to double the system’s already quick tank refill rate. The system uses a custom 11-gauge steel, powder-coated bracket that is made in the USA, The system mounts securely between the front frame rails, and just in front of the radiator of the Ford F-150 using ¾-inch hardened steel bolts. Its compact design allows all parts of the system to exist in the same space, without using any cargo space whatsoever. Wiring for the system is simple, with an included custom-fit wiring harness that only requires a few basic connections. Installation time for this system is fast, at approximately one hour.
FORD FORWARD OBA SYSTEM:
↧
↧
TrailBlaster™ Air Horn System for Jeep JK
Jeep JKs are some of the most popular off road vehicles on the planet. The only problem is that they’re light on room to accessorize them. When it comes to installing big, loud, nasty train horns – size almost always matters most. That is, until the TrailBlaster™ bolt-on dual air horn kit from Kleinn Air Horns arrived. Jeepers with this system constantly tell us that they can’t believe the amount of sound that comes out of their horns! The system uses a small-but-potent air compressor and a 0.66 gallon air tank, which are mated to a purpose-built, made in USA bracket that fits into factory locations in the rear chassis area of 2007-2014 Jeep JKs. The TrailBlaster™ requires no cutting, welding or drilling and is able to be installed using simple hand tools. The kit features a second bracket that is also made in the USA that allows our XCR2.0 corrosion-resistant Model 101 horns to be bolted to a factory location at the charcoal canister.
↧
Fiery, Fierce and Fizzy New Color Options Expand 3M™ Wrap Film Series 1080 to 75 Colors: Customize vehicles with 18 new colors, including Fiery Orange, Fierce Fuchsia and Raspberry Fizz
St. Paul, Minn. – (October 1, 2014) – 3M Commercial Solutions’ addition of 18 new unique colors to the 3MTM Wrap Film Series 1080 line provides graphics installers with even more power to design vehicles that incite jaw-dropping reactions. With the addition of bold new colors like Satin Canyon Copper and Sheer Luck Green, graphics installers can now choose from 75 of the most innovative colors and finishes in the industry.
“3M is committed to listening to our customers, and when they asked for more unique options, the 3M team worked hard to create these new colors,” said Doug Blackwell, Business Development Manager, 3M. “These new, dynamic colors – like my personal favorite, Gloss Black Rose – will help expand graphics installers’ imaginations and allow them to offer even more design options for their clients.”
↧
SLAMTOP - universal soft close device for car doors
Slamstop is designed to silently and mechanically close a partially open car door to ensure maximum safety, and it is compatible with all vehicle makes and models. Previously available on only high-end vehicles as part of a luxury package or factory option, Slamstop works with all standard driver and passenger doors as well as sliding doors. Slamstop uses a unique sensor that automatically monitors when a vehicle’s door reaches a specific distance from the car frame. As soon as the space is detected, a sensor is triggered and transfers the information to the Slamstop operating system to close the door the remainder of the way. Information: http://www.slamstop.net/ or +1818 850 77 60.
↧
New KICKER® PX-Series Power Amplifiers Smaller for Easier Installation, More Power Options
STILLWATER, USA – KICKER® Performance Audio has refreshed its PX-Series Amplifiers with a smaller chassis and two new additional power options to provide mobile-audio and powersports enthusiasts with a high-power, low-current-draw amplifier solution for any listening environment. These amplifiers are the perfect addition to rod and custom vehicles that need to keep their classic looks, vehicles that simply want great audio but retain a factory look, or for motorized vehicles with small battery/charging systems like UTVs or motorcycles.
↧
↧
AEROMOTIVE REGULATES ON COMPETITION WITH NEW X1
Lenexa, KS – October, 2014 – Aeromotive announced today the expansion of their already impressive lineup of fuel pressure regulators with the addition of the X1 Series Regulator. As the next step in the evolution of Aeromotive’s line of regulators, the X1 is one of the most innovative regulator designs to hit market in recent years.
From carbureted to EFI pressures, naturally aspirated or forced induction, the X1 is designed to span the entire range of applications providing dependable fuel pressure regulation. Making the change from a carburetor to EFI or EFI to carburetor? There is no longer a need to purchase a new regulator. Simply utilize one of three conversion kits (sold separately) to match the operating range required of your engine. Replace original X1 Series regulator internals with the conversion kit of your choice (Part #’s 13013, 13014, and 13015) and you have a regulator with vastly different characteristics.
↧
AEROMOTIVE REGULATES ON COMPETITION WITH NEW X1
Lenexa, KS – October, 2014 – Aeromotive announced today the expansion of their already impressive lineup of fuel pressure regulators with the addition of the X1 Series Regulator. As the next step in the evolution of Aeromotive’s line of regulators, the X1 is one of the most innovative regulator designs to hit market in recent years.
From carbureted to EFI pressures, naturally aspirated or forced induction, the X1 is designed to span the entire range of applications providing dependable fuel pressure regulation. Making the change from a carburetor to EFI or EFI to carburetor? There is no longer a need to purchase a new regulator. Simply utilize one of three conversion kits (sold separately) to match the operating range required of your engine. Replace original X1 Series regulator internals with the conversion kit of your choice (Part #’s 13013, 13014, and 13015) and you have a regulator with vastly different characteristics.
↧
CLEARPLEX JOINS RAHAL LETTERMAN LANIGAN RACING AS AN ASSOCIATE SPONSOR OF THEIR INDY CAR AND SPORTS CAR PROGRAMS
News Release
Rahal Letterman Lanigan Racing
October 22, 2014
CLEARPLEX JOINS RAHAL LETTERMAN LANIGAN RACING AS AN ASSOCIATE SPONSOR OF THEIR INDY CAR AND SPORTS CAR PROGRAMS
BROWNSBURG, Ind. (October 22, 2014) – Rahal Letterman Lanigan Racing (RLL) announced today that ClearPlex®, makers of leading automotive glass protection film, have entered into a multi-year agreement as an associate sponsor of their Verizon IndyCar Series and Tudor United SportsCar programs. In addition, ClearPlex® was named the Official Windshield Protection of RLL, with their proprietary films to be installed on all team vehicles and transporters providing an instant proving ground.
↧
CLEARPLEX JOINS RAHAL LETTERMAN LANIGAN RACING AS AN ASSOCIATE SPONSOR OF THEIR INDY CAR AND SPORTS CAR PROGRAMS
News Release
Rahal Letterman Lanigan Racing
October 22, 2014
CLEARPLEX JOINS RAHAL LETTERMAN LANIGAN RACING AS AN ASSOCIATE SPONSOR OF THEIR INDY CAR AND SPORTS CAR PROGRAMS
BROWNSBURG, Ind. (October 22, 2014) – Rahal Letterman Lanigan Racing (RLL) announced today that ClearPlex®, makers of leading automotive glass protection film, have entered into a multi-year agreement as an associate sponsor of their Verizon IndyCar Series and Tudor United SportsCar programs. In addition, ClearPlex® was named the Official Windshield Protection of RLL, with their proprietary films to be installed on all team vehicles and transporters providing an instant proving ground.
↧
↧
WELD Racing Hosts Celebrity Appearances at the 2014 SEMA Show
Kansas City, Mo. – WELD Racing (WELD), manufacturers of WELD Racing Wheels, is pleased to host a variety of celebrity guests all week long during the 2014 SEMA Show. WELD supports all forms of racing, and the list of celebrities that will visit WELD demonstrates this. Formula Drift driver Justin Pawlak, also known as JTP, will be visiting on Tuesday. Robert “Top Gun” Hight, NHRA Funny Car Champion from John Force Racing will make an appearance on Wednesday. Thursday WELD will host Big Chief and Murder Nova from Discovery Channel’s Street Outlaws, and no SEMA Show would be complete without a visit from the first lady of racing, Linda Vaughn who will wrap up these appearances on Friday. All guests are likely to draw a crowd, so plan to arrive early at the WELD Racing booth #24957 in the Racing and Performance Hall.
Event Details:
All appearances are at the WELD Racing booth #24957
Tuesday November 4, 10:30 a.m. - 11:30 a.m.
JTP, Justin Pawlak, driver, Formula Drift
↧
QA1 Teams with Hollywood Hot Rods® for Traditional-Looking Performance Shocks
Lakeville, MN [October 23, 2014] – QA1 has teamed with the legendary Troy Ladd of Hollywood Hot Rods® to release traditional-looking, adjustable shocks for street rods.
QA1 President, Melissa Scoles is excited about the team-up, “Troy has been great to work with. His expertise as an award-winning street rod builder has been invaluable as we worked together to design this new series of shocks.”
↧
Heatshield Products has the Voodoo
For Release: October 23, 2014
Contact: Steve Heye
760-751-0441
steve@heatshieldproducts.com
Heatshield Products will be featuring the world’s first 30” turbine powered at the SEMA show.
Las Vegas, NV –Heatshield Products is proud to announce the presence of Voodoo Bikeworks turbine powered bike as seen on History Channel’s Bike Battleground Phoenix.
Heatshield Products helped out Kody and his crew with our Inferno Wrap. It was the only wrap Kody found that could tame the heat of his 30” turbine powered bagger. Taming the heat was absolutely critical to this build. An extreme heat power plant required the ultimate in exhaust wrap. It even thrived the oil leak and fire that ensued shortly after. When it had to go down for an attitude adjustment to the turbine, Kody was able to unwrap the wrap without it falling apart. Stop on by say high and check out on hot bike and see how it keeps it’s cool.
↧
COVERCRAFT® INDUSTRIES SUPPORTS BREAST CANCER RESEARCH, TREATMENT AND PREVENTION WITH THE COVERS FOR CAUSES PROJECT
Pauls Valley, Okla. – October 2, 2014 – With October comes national Breast Cancer Awareness Month, and Covercraft renews support for its Covers for Causes project. Launched in 2012, the company has created a special line of products to help raise awareness and vital funding for breast cancer research, education, treatment and prevention.
Each pink, custom fit Covers for Causes car cover has been manufactured in the U.S.A. using Kimberly-Clark’s unique NOAH® fabric. This revolutionary fabric weighs only 4.75 ounces per square yard, yet it creates a breathable barrier that resists water while allowing condensation beneath the cover to evaporate. Each cover is silkscreened with the unique Covers for Causes logo that includes the universal pink ribbon to encourage breast cancer awareness. And, each cover carries an amazing four-year warranty. To create a stylish and functional set, Covercraft also offers the custom, pink, UVS100® Sunscreens with the Covers for Causes logo.
↧
↧
COVERCRAFT® INDUSTRIES CELEBRATES 50 YEARS OF THE FORD MUSTANG
Pauls Valley, Okla. – September 19, 2014 – Known as the manufacturer of the World’s Best Custom Car Covers®, Covercraft Industries, Inc. (Covercraft) has been selected as one of 50 aftermarket companies to offer officially licensed 50th anniversary commemorative Ford Mustang products.
For a limited time, Covercraft is offering its Crafted2Fit® Mustang car covers and UVS100® Sunscreens with the optional “Mustang 50 Years” logo. Covers can be ordered with either the plain or bordered logo, while the UVS Sunscreens are available with the bordered logo
option only.
↧
WELD Racing Names The Marx Group as Agency of Record for Public Relations
Kansas City, Mo. – WELD Racing (WELD), manufacturers of WELD Racing Wheels, has selected The Marx Group as the company's agency of record for all public relations efforts. The Marx Group will assist WELD with communicating the new WELD marketing and branding strategies through trade show support, public relations writing and distribution, and will represent the company to trade and consumer media.
“We chose The Marx Group to assist us with public relations based on their extensive experience with PR and marketing tactics specific to the automotive aftermarket," said Chris Bovis, vice president of marketing, WELD Racing. "Because of their industry experience, they have the ability to fully integrate with our existing staff right out of the gate, making them a natural extension of the WELD Racing marketing team."
↧
LINK COVERCRAFT PRODUCT DATA TO EXISTING ONLINE CART SYSTEM WITH CARTLINK®2
COVERCRAFT INTRODUCES ENHANCED, FREE CARTLINK®2 SERVICE FOR DEALERS
LINK COVERCRAFT PRODUCT DATA TO EXISTING ONLINE CART SYSTEM AT NO CHARGE
Pauls Valley, Okla. – October 15, 2014 – Covercraft has created a seamless, innovative system that integrates the Covercraft product search function into the existing dealer website that's linked to the online shopping cart at absolutely no cost to the dealer. And, it’s simple.
With CartLink2, customers can easily search and review any of Covercraft’s custom products including more than 80,000 custom fit cover patterns and a complete line of protective products for car, truck and SUV, and add them to the website shopping cart – all without leaving the existing website.
↧
WELD RACING STRENGTHENS MOTORSPORTS TEAM; PROMOTES SALES EXECUTIVE
(Kansas City, Mo.) – Expanding on its nearly 50 year commitment to motorsports, WELD Racing (WELD) has announced the promotion of Mike Mulcahy to vice president of sales. Mulcahy now has total responsibility for company sales including street performance, truck and motorsports.
Mulcahy joined WELD in March of 2014 as vice president of the company’s street and truck business lines after a successful career as an executive with Federal Mogul and running his own client-focused motorsports business.
The company has also announced the addition of Greg Bennett to WELD’s sales and marketing team. Bennett assumes responsibility for trackside service and sales for WELD’s drag racing and oval track racing product lines. In partnership with the most advanced engineering team in the specialty wheel industry, Bennett will oversee WELD’s close collaboration with professional and sportsman racers to ensure that WELD’s partners continue to dominate the winner’s circle.
↧
↧
Heatshield Products Introduces Revolutionary HP Stealth Shield, Designed and Proven to Reduce Heat When Mounted Inside Your Vehicle
For Release: February 25, 2014
Contact: Steve Heye
760-913-6015
steve@heatshieldproducts.com
Heatshield Products Introduces Revolutionary HP Stealth Shield, Designed and Proven to Reduce Heat When Mounted Inside Your Vehicle
• HP Stealth Shield measures only 1/8-inch thick for easy installation under carpet
• Uses proprietary technology developed for Heatshield Products unique welding blankets
• Capable of withstanding a continuous 1,800 degrees Fahrenheit
↧
WELD Racing News Conference to Announce New Product and Branding Strategy and New Agreement with a Major Specialty Vehicle Manufacturer
Kansas City, Mo. – WELD Racing (WELD), manufacturers of WELD Racing Wheels, will host a news conference at SEMA 2014 on Wednesday November 5 at 12 p.m. to unveil a new product and branding strategy that will redefine the WELD Racing brand name and extend the company’s reach into exciting new market segments. WELD’s strength has always been in their uncompromising commitment toward building world-class racing wheels. In 2015, that commitment will be paired with new marketing materials and messaging to reinforce the brand, and reassert WELD as the global leader in performance wheel technology.
This media event will outline new strategies and structural changes that will strengthen the brand. There will also be information about product changes and updates that will affect enthusiasts, distributors, dealers, and the media.
↧
Hot Shoppe Designs is proud to present our newest style custom-made crew shirt, the “Dealer Staff Shirt”.
PRESS RELEASE
For Immediate Release
Contact
Dave Marietti
Hot Shoppe Designs
(949) 487-2828
dmarietti@hotshoppedesigns.com
Hot Shoppe Designs Custom Dealer Staff Shirt
San Clemente, CA – October 17, 2014
Hot Shoppe Designs is proud to present our newest style crew shirt, the “Dealer Staff Shirt”. Coverstitched details, fashion collar with collar stand, three-button placket or 5” zipper, optional shoulder panels.
Hot Shoppe Designs has been in business over 30 years, everything Hot Shoppe makes is made in our Southern California Facility using primarily domestic fabrics and trims.
Custom-made to order, unlimited colors, unlimited logos, low minimums starting at six pcs., we offer men’s, women’s and youth sizes.
Small minimums, quick turnarounds – everything for your crew from jackets to tech-tees.
“Hot Shoppe Designs – When You’re Ready to Go Pro”
↧
